Successful Cases
AIRHORSE
Air Compressor System Upgrade for an Automotive Electronics Company —Balancing Energy Saving and Stability
As automobiles become increasingly intelligent and digitized, the market share of electric vehicles has grown significantly in recent years.
In the automotive electronics manufacturing workshop, a large number of automated equipment require a stable source of compressed air, such as automated assembly equipment, pneumatic testing systems, production line control equipment, and precision assembly tools. Unstable compressed air pressure, insufficient air supply, or equipment shutdown will affect the efficiency of the entire production line.
Therefore, for automotive electronics manufacturers, establishing a stable, efficient, and energy-saving compressed air system has become an important part of production management.
An automotive electronics manufacturer based in Hunan specializes in the R&D and manufacturing of automotive electronic products, with applications spanning both new energy vehicles and traditional fuel-powered vehicles.
As the scale of their operations has gradually expanded, their existing compressed air system is no longer sufficient to meet production demands. The primary issues include:
×High energy consumption during air compressor operation
×Significant pressure loss in the output
×Extended operating hours, necessitating higher standards of system stability
The client seeks to upgrade their equipment to establish a more stable and efficient compressed air power system.
After comparing and evaluating multiple suppliers and their technologies, they finally decided to purchase a complete AIRHORSE 15kW permanent magnet variable speed drive screw air compressor, including a suitable air tank, air dryer and air filters——to provide a stable supply of compressed air for their workshop.
In traditional air compression systems, fixed-speed air compressors typically operate at a constant rotational speed.
When the gas consumption in the workshop decreases, the compressor still runs at full speed, which can easily lead to No-load and energy waste.
The AIRHORSE 15kW PM VSD screw air compressor adopts a permanent magnet variable frequency drive system. The compressor can automatically adjust the motor speed according to your actual air consumption, so as to flexibly adjust the airflow, reduce no-load, and stabilize the discharge pressure. This mode of operation not only lowers the unit's energy consumption but also improve the overall operational efficiency of the entire compression system.
Boosting Overall System Efficiency
The Airend is the core component of the entire compressor. The AIRHORSE 15kW compressor features a high-efficiency screw air-end design; by optimizing the rotor structure and compression efficiency, the compressor achieves a higher air output volume during operation.
The compressor has higher compression efficiency, smoother operation, and better noise control in actual operation. Furthermore, Integrated with an energy-efficient, high-efficiency PM synchronous motor, the system's overall energy efficiency is further improved. Even under conditions of 24-hour operation, the compressor can still maintain a stable and reliable operating state.
Intelligent Control System
The AIRHORSE 15kW PM VSD Screw Air Compressor is equipped with an intelligent control system capable of real-time monitoring of operational data—including working pressure, operating temperature, current load, and total runtime.
The system features multiple protective functions and provides proactive fault warnings; should any anomalies arise, it promptly issues alarm notifications to facilitate timely inspection and troubleshooting by maintenance personnel. This not only enhances the operational safety of the equipment but also effectively mitigates the risk of production downtime.
Comparison of Air Compressor System Solutions: In the context of automotive electronics manufacturing, different types of compressed air compressors exhibit significant variations in terms of operational efficiency and energy consumption.
Why Should Choose PM VSD Air Compressors？
Currently, AIRHORSE PM VSD screw air compressors are widely utilized across numerous manufacturing sectors—including automotive component manufacturing, automotive electronics, precision machining, and automation equipment manufacturing, etc...
Permanent Magnet Variable Frequency Screw Air Compressors deliver:
✔ A more stable air supply system
✔ Lower energy consumption
✔ Higher operational efficiency
If your business is considering upgrading the existing compressed air system, reducing production energy costs, or improving equipment stability,
please do not hesitate to contact us. We will provide you with a tailored assessment of your compressed air system, a customized energy-saving upgrade plan, and comprehensive energy-efficient compressed air solutions.
Air Compressor System Upgrade for an Automotive Electronics Company —Balancing Energy Saving and Stability
As automobiles become increasingly intelligent and digitized, the market share of electric vehicles has grown significantly in recent years.
In the automotive electronics manufacturing workshop, a large number of automated equipment require a stable source of compressed air, such as automated assembly equipment, pneumatic testing systems, production line control equipment, and precision assembly tools. Unstable compressed air pressure, insufficient air supply, or equipment shutdown will affect the efficiency of the entire production line.
Therefore, for automotive electronics manufacturers, establishing a stable, efficient, and energy-saving compressed air system has become an important part of production management.
An automotive electronics manufacturer based in Hunan specializes in the R&D and manufacturing of automotive electronic products, with applications spanning both new energy vehicles and traditional fuel-powered vehicles.
As the scale of their operations has gradually expanded, their existing compressed air system is no longer sufficient to meet production demands. The primary issues include:
×High energy consumption during air compressor operation
×Significant pressure loss in the output
×Extended operating hours, necessitating higher standards of system stability
The client seeks to upgrade their equipment to establish a more stable and efficient compressed air power system.
After comparing and evaluating multiple suppliers and their technologies, they finally decided to purchase a complete AIRHORSE 15kW permanent magnet variable speed drive screw air compressor, including a suitable air tank, air dryer and air filters——to provide a stable supply of compressed air for their workshop.
In traditional air compression systems, fixed-speed air compressors typically operate at a constant rotational speed.
When the gas consumption in the workshop decreases, the compressor still runs at full speed, which can easily lead to No-load and energy waste.
The AIRHORSE 15kW PM VSD screw air compressor adopts a permanent magnet variable frequency drive system. The compressor can automatically adjust the motor speed according to your actual air consumption, so as to flexibly adjust the airflow, reduce no-load, and stabilize the discharge pressure. This mode of operation not only lowers the unit's energy consumption but also improve the overall operational efficiency of the entire compression system.
Boosting Overall System Efficiency
The Airend is the core component of the entire compressor. The AIRHORSE 15kW compressor features a high-efficiency screw air-end design; by optimizing the rotor structure and compression efficiency, the compressor achieves a higher air output volume during operation.
The compressor has higher compression efficiency, smoother operation, and better noise control in actual operation. Furthermore, Integrated with an energy-efficient, high-efficiency PM synchronous motor, the system's overall energy efficiency is further improved. Even under conditions of 24-hour operation, the compressor can still maintain a stable and reliable operating state.
Intelligent Control System
The AIRHORSE 15kW PM VSD Screw Air Compressor is equipped with an intelligent control system capable of real-time monitoring of operational data—including working pressure, operating temperature, current load, and total runtime.
The system features multiple protective functions and provides proactive fault warnings; should any anomalies arise, it promptly issues alarm notifications to facilitate timely inspection and troubleshooting by maintenance personnel. This not only enhances the operational safety of the equipment but also effectively mitigates the risk of production downtime.
Comparison of Air Compressor System Solutions: In the context of automotive electronics manufacturing, different types of compressed air compressors exhibit significant variations in terms of operational efficiency and energy consumption.
Why Should Choose PM VSD Air Compressors？
Currently, AIRHORSE PM VSD screw air compressors are widely utilized across numerous manufacturing sectors—including automotive component manufacturing, automotive electronics, precision machining, and automation equipment manufacturing, etc...
Permanent Magnet Variable Frequency Screw Air Compressors deliver:
✔ A more stable air supply system
✔ Lower energy consumption
✔ Higher operational efficiency
If your business is considering upgrading the existing compressed air system, reducing production energy costs, or improving equipment stability,
please do not hesitate to contact us. We will provide you with a tailored assessment of your compressed air system, a customized energy-saving upgrade plan, and comprehensive energy-efficient compressed air solutions.
